Thank you for sending your enquiry! One of our team members will contact you shortly.
Thank you for sending your booking! One of our team members will contact you shortly.
Course Outline
Intensive ETAP
System Modeling and Load Flow Analysis
- ETAP Interface & One-Line Diagram (OLD)
- Navigating the Graphical User Interface (GUI) and Project Toolbar.
- Building a robust One-Line Diagram: Adding Busbars, Transformers, Generators, and Loads.
- Managing the Element Libraries and Property Editors.
- Load Flow Analysis
- Configuring Study Cases and solution parameters.
- Understanding the Newton-Raphson, Fast Decoupled, and Adaptive Newton-Raphson methods.
- Practical: Executing Load Flow studies, interpreting results (voltage drops, power factors), and utilizing the "Alert View" to identify overloaded components.
Short Circuit & Motor Starting Studies
- Short Circuit Analysis
- Overview of IEEE and IEC standards for fault calculations.
- Analyzing 3-phase, Line-to-Ground, Line-to-Line, and Double Line-to-Ground faults.
- Determining the Duty and Breaking capacity of Circuit Breakers.
- Motor Starting Analysis
- Modeling Static versus Dynamic motor starting scenarios.
- Evaluating the impact of "Voltage Dip" on the broader system during motor acceleration.
- Practical: Comparing "Direct-on-Line" (DOL) starting against Star-Delta or VFD methods within the simulation environment.
Protection Coordination & Network Simulation
- Protective Device Coordination (Star View)
- Introduction to the ETAP Star (Protection & Coordination) module.
- Integrating Overcurrent (50/51) and Ground Fault (50N/51N) relays.
- Plotting Time-Current Characteristic (TCC) curves.
- Selectivity and Discrimination
- Tuning relay settings to ensure only the faulted section is isolated.
- Verifying transformer damage curves and cable thermal limits.
- Hands-on Workshop: Distribution Network Simulation
- Capstone Project: Constructing a standard distribution network from scratch.
- Conducting a comprehensive study encompassing Load Flow, Short Circuit, and Coordination.
- Final Report Generation and result visualization.
Basic GIS Training:
- Concepts and applications of GIS
- Introduction to ArcGIS Pro
- GIS Data Types and Formats
- Geodatabase creation and data management
- Map preparation
GIS Mapping:
- Preparing base data from satellite or drone imagery
- Working with attributes
- Utilizing geoprocessing tools
- Conducting GIS data analysis
- Pole data processing
- Consumer data processing
- Designing map templates
- Cartographic mapping
Requirements
70 Hours
Testimonials (3)
Learning that the QGIS and a tool that can used by other different professionals such land survey
Bame Duncan Koko - Bentel Technologies (Pty) Ltd
Course - QGIS for Geographic Information System
How to use open satellites data for real applications
Tshering Dorji - Druk Holding and Investments
Course - Advanced Geographic Information Systems (GIS)
Hands-on examples allowed us to get an actual feel for how the program works. Good explanations and integration of theoretical concepts and how they relate to practical applications.
